Skip to content

433 MOT Authorisations Withdrawn as Garages Urged to Strengthen Compliance

MOT tester carrying out a vehicle inspection at a UK MOT testing station.
MOT Trade News
October 15, 2026
JT

A total of 433 MOT authorisations were withdrawn during 2025/26, according to DVSA figures highlighted by Autotech Training, prompting renewed calls for garages to give MOT management and compliance sufficient attention.

The figures show that 145 Authorised Examiners (AEs) and 288 MOT testers had their authorisations withdrawn during the financial year.

A further 247 AEs and 176 testers received warnings, bringing the total number of reported warnings to 423.

The figures, highlighted by Autotech Training in September and reported again by the automotive trade press on 14 October 2026, underline the potential consequences of failing to meet MOT testing and management requirements.

However, industry specialists have warned against interpreting the figures as evidence of widespread wrongdoing across the MOT sector.

How many MOT authorisations were withdrawn in 2025/26?

The figures reported by Autotech Training break down as follows:

Enforcement outcome Authorised Examiners MOT testers
Authorisation withdrawn 145 288
Warning issued 247 176
Total 392 464

The combined figures represent 433 authorisation withdrawals and 423 warnings.

Importantly, these are different categories of regulatory action. They should not be interpreted as 856 garage closures, criminal convictions or confirmed fraud cases.

Authorised Examiners are the businesses or organisations authorised to operate MOT testing stations, while individual testers hold separate approval to carry out MOT tests.

A withdrawal affecting an individual tester does not necessarily mean that the entire MOT station has lost its authorisation.

Similarly, a warning does not have the same consequences as withdrawal of authorisation.

The reported figures do not establish that every case involved dishonesty. MOT disciplinary action can arise from a range of testing, administrative and management shortcomings.

Autotech Training warns against overstating non-compliance

Rob Walsh, Head of MOT at Autotech Training, said the figures should not be used to suggest widespread non-compliance.

He stressed that the vast majority of MOT businesses and testers take their responsibilities seriously.

Instead, Walsh highlighted the pressures faced by busy workshops, where MOT compliance must compete for management attention alongside staffing, repairs, customer service and other day-to-day responsibilities.

His central message was that garages need to consider whether the people responsible for their MOT operations have the time, knowledge and processes required to manage them effectively.

This is an important distinction.

While deliberate fraud and dishonesty remain serious enforcement concerns, not every disciplinary issue arises from an intentional attempt to circumvent MOT rules.

Poor record-keeping, inadequate supervision, missed quality control checks and failures to keep up with requirements can also expose businesses to regulatory risk.

Why MOT management matters

Operating an MOT testing station involves more than ensuring that individual vehicles are tested correctly.

Authorised Examiners have ongoing responsibilities under the DVSA MOT testing guide.

These include ensuring that testing is properly managed, relevant records are maintained, equipment meets the required standards and staff understand their responsibilities.

For businesses with several testers, multiple MOT bays or more than one site, the management task can become increasingly complex.

Problems may develop when responsibility is unclear or essential checks are left to one person without suitable cover.

A garage may be technically capable of carrying out MOT tests while still having weaknesses in its management arrangements.

Those weaknesses can become significant when DVSA reviews a station’s compliance.

Five MOT compliance areas garages should review

The enforcement figures provide a useful opportunity for MOT businesses to assess their existing arrangements.

1. Tester training and annual assessments

MOT testers must complete the required annual training and assessment within the applicable deadlines.

Authorised Examiners should have a reliable method of checking that every tester remains eligible to conduct tests.

Simply assuming that an experienced tester has completed the necessary requirements is not sufficient.

2. Quality control checks

Quality control is an essential part of maintaining consistent MOT testing standards.

The DVSA testing guide sets out responsibilities for ensuring that checks are conducted by competent people with the appropriate knowledge, skills and experience.

Garages should be able to demonstrate that quality control is being carried out appropriately and that any problems identified are followed up.

A quality control process is of limited value if findings are recorded but never acted upon.

3. Equipment maintenance and calibration

MOT testing equipment must remain suitable for use and meet the relevant requirements.

This includes keeping track of calibration, inspection and maintenance arrangements where applicable.

A missed calibration or equipment fault can create problems for a business even when the individual tester is otherwise working conscientiously.

4. MOT records and management oversight

Authorised Examiners should ensure that testing activity and relevant records are reviewed appropriately.

Unusual patterns, recurring errors or unresolved issues may require investigation.

Where several employees share responsibility for the MOT operation, management arrangements should make clear who checks what and when.

5. Keeping up with DVSA changes

The MOT testing guide and inspection manuals are updated periodically.

Garages need an effective way to identify relevant changes, understand their implications and communicate them to testers.

Recent changes to MOT requirements demonstrate why relying on long-established working practices without reviewing updated guidance can create unnecessary risk.

What happens when an MOT authorisation is withdrawn?

The consequences depend on whether the action affects an Authorised Examiner or an individual MOT tester.

Where a business loses its authorisation to operate an MOT testing station, it cannot simply continue carrying out MOT tests under that authorisation.

Where an individual tester’s approval is withdrawn, that person cannot continue testing unless and until they are appropriately authorised again.

The DVSA testing guide contains disciplinary procedures covering warnings, cessation of authorisation and relevant appeal arrangements.

Some cases involve serious or deliberate wrongdoing, while others may concern failures to meet prescribed testing or management standards.

The specific circumstances determine the applicable disciplinary process and outcome.

For garages, the consequences can extend beyond the immediate regulatory action.

Loss of MOT testing capability can disrupt customer bookings, reduce workshop income and affect customer confidence.

This makes preventative compliance management a commercial consideration as well as a regulatory obligation.

MOT fraud and routine compliance failures are not the same

Recent enforcement cases have highlighted the consequences of deliberately issuing false MOT certificates.

However, the latest withdrawal figures should not be treated as a count of fraudulent MOT tests.

DVSA can take action for a variety of reasons, and the published totals do not provide a detailed breakdown of the circumstances behind every withdrawal.

The distinction matters for the reputation of the MOT industry.

Most testers and garages work to maintain testing standards, and responsible businesses should not be characterised as dishonest simply because regulatory action has been taken elsewhere.

At the same time, even unintentional failures in management systems can have serious consequences.

A sound compliance process should help identify problems before they develop into formal disciplinary matters.

Why busy garages may be particularly exposed

Independent garage owners often manage multiple responsibilities.

A typical day can involve allocating work, ordering parts, dealing with customers, managing staff, handling technical problems and overseeing finances.

MOT compliance can become another responsibility on an already demanding list.

For smaller businesses, much of this work may fall to the owner or one experienced manager.

The challenge is not necessarily a lack of commitment to testing standards, but ensuring that essential compliance tasks continue to be completed consistently.

A structured approach can help reduce reliance on memory and make responsibilities easier to manage when staff are absent or workloads increase.

For multi-site businesses, consistent oversight is particularly important.

What should MOT station owners do now?

The figures do not mean that every MOT station needs to overhaul its procedures.

They do provide a reason to check whether existing arrangements are effective.

A sensible starting point is to review tester eligibility, quality control arrangements, equipment records, management responsibilities and procedures for responding to DVSA updates.

Where gaps are identified, they should be addressed promptly and documented appropriately.

Garages should also ensure that the people responsible for MOT management understand the relevant sections of the official DVSA testing guide.

External training, specialist support or appropriate compliance management tools may help some businesses, but they do not remove the Authorised Examiner’s underlying responsibilities.

A reminder that MOT compliance needs continuous attention

The 2025/26 figures show that DVSA enforcement action can have significant consequences for both individual testers and authorised businesses.

With 433 authorisations withdrawn and hundreds of further warnings issued, the importance of effective oversight is clear.

Autotech Training’s warning is not that the MOT industry is broadly failing, but that compliance responsibilities must be given adequate attention even in the busiest workshops.

For MOT station owners, the practical message is straightforward: make compliance part of everyday management rather than something reviewed only when an inspection or problem arises.

How confident are you in your MOT compliance?

Running an MOT station means keeping on top of testing standards, staff responsibilities, quality control and changing DVSA requirements.

MOT Shield is aimed at MOT garage owners who want support with managing their compliance responsibilities.

Find out more about MOT Shield and the services available to your business.

 

External sources

Autotech Training — 400+ MOT Authorisations Withdrawn as Autotech Highlights MOT Management Pressures, 16 September 2026
https://autotechtraining.co.uk/news/400-mot-authorisations-withdrawn/

Autotechnician — Over 400 MOT Authorisations Withdrawn, 14 October 2026
https://autotechnician.co.uk/over-400-mot-authorisations-withdrawn/

DVSA — MOT Testing Guide for Test Stations
https://www.gov.uk/guidance/mot-testing-guide

DVSA — Appendix 8: Disciplinary Procedures
https://www.gov.uk/guidance/mot-testing-guide/appendix-8-disciplinary-procedures

DVSA — MOT Testing Guide Updates
https://www.gov.uk/guidance/mot-testing-guide/updates

What’s your view? Readers are invited to add comments and suggestions to this article.

You must be logged in to leave a comment.

Login or Register to Comment
MOTesting Logo
Subscribe to our newsletter, to get the latest news in your inbox.