Skip to content

MOT Light Rules: What Lights Are Checked During an MOT?

MOT tester checking vehicle headlight aim during a UK MOT test
MOT Checks List
August 11, 2026
Staff writer

Vehicle lights are an important part of the MOT test. Headlights, brake lights, indicators, position lamps, fog lights and other lighting equipment can all be inspected depending on the vehicle’s age, type and specification.

The MOT doesn’t simply check whether a bulb comes on. An MOT tester can also inspect the condition, security, colour, operation and compatibility of lamps, while dipped-beam headlights are checked for correct alignment.

This guide explains the main MOT light rules, which lights are checked, common reasons for MOT lighting failures and the defect categories that can apply.

What lights are checked during an MOT?

Depending on the vehicle and the requirements that apply to it, an MOT can include checks of:

  • Headlights and dipped/main beam
  • Headlight aim
  • Front and rear position lamps
  • Daytime running lamps (DRLs)
  • Brake lights
  • Indicators
  • Hazard warning lights
  • Front and rear fog lamps
  • Reversing lights
  • Rear registration plate lights
  • Rear reflectors
  • Applicable dashboard lighting tell-tales
  • Headlamp levelling systems where applicable
  • Headlamp cleaning systems where applicable
  • Trailer electrical sockets where applicable
  • Electrical wiring
  • Battery security

Not every vehicle is subject to exactly the same lighting requirements.

The rules can vary according to factors including the vehicle’s date of first use, type and equipment fitted.

For an overview of the whole MOT inspection, see our complete MOT test checklist.


Headlights

Mandatory headlights are inspected during the MOT.

The tester can check headlights for:

  • Operation
  • Condition
  • Security
  • Light output
  • Colour
  • Compatibility between the lamp and light source
  • Correct switching
  • Headlamp aim

There are exemptions and different requirements for some older and specialist vehicles. For example, vehicles first used before 1 January 1931 do not need headlamps.

LED headlamps also require slightly different consideration because a lamp can contain several individual light sources.

A small number of failed LEDs within a multiple-light-source lamp will not necessarily result in the same defect classification as a headlamp that is completely inoperative.

Headlamp condition – quick reference

Defect MOT category
LED headlamp with up to half of its light sources not functioning MINOR
Headlamp missing, inoperative or more than half of LED light sources not functioning MAJOR
Headlamp reflector or lens slightly defective MINOR
Headlamp reflector or lens seriously defective or missing MAJOR
Headlamp not securely attached MAJOR

Headlight aim

Dipped-beam headlight alignment is checked using approved headlamp aim testing equipment.

Incorrectly aligned headlights can reduce the driver’s view of the road or cause excessive glare to other road users.

All fitted dipped-beam headlamps that are subject to the test are checked.

Headlamp aim – quick reference

Defect MOT category
Headlamp aim outside the permitted limits MAJOR
Headlamp aim cannot be tested MAJOR
Beam image obviously incorrect MAJOR

Minor adjustment of headlamp aim is permitted during the MOT test. This is different from carrying out a repair.

Why do headlights fail on aim?

Common causes can include:

  • Replacement bulb fitted incorrectly
  • Headlamp previously adjusted incorrectly
  • Replacement headlamp fitted incorrectly
  • Damaged headlamp mounting
  • Accident or bodywork damage
  • Vehicle suspension or ride-height changes
  • Headlamp levelling problems

If you’ve recently replaced a headlight bulb, it’s worth checking that it has seated correctly before the MOT.


Headlight switching

Dipped and main-beam headlights need to operate correctly when their switches are used.

The system must correctly change between dipped and main beam.

Headlight switching – quick reference

Defect MOT category
Headlamp on/off switch does not operate as required MINOR
Headlamp dip switch does not operate as required MAJOR

LED and HID headlights

LED and high-intensity discharge (HID) headlights are an area where MOT requirements can cause confusion.

From 14 October 2026, certain ECE-approved LED replacement (LEDr) bulbs are permitted in compatible existing halogen headlamp units for Class 3, 4, 5 and 7 vehicles.

The LED replacement bulb must be approved for use in the particular headlamp, and the vehicle must display the required manufacturer-issued approval sticker. The sticker must be permanently attached, readily visible, legible and free from apparent tampering.

MOT testers do not need to independently verify approval numbers or manufacturer information against external databases or documentation.

If the sticker is missing, unreadable, apparently tampered with or clearly does not match the fitted bulb, the headlamp must fail with a Major defect for an incompatible light source and lamp.

The new rules do not permit all aftermarket LED conversions. Unapproved LED replacements remain unacceptable, and the change does not extend to HID bulb conversions in halogen headlamps or motorcycles in Classes 1 and 2.

Replacing a complete headlamp assembly with a unit designed for LED or HID operation is assessed separately under the relevant MOT requirements.

For full details, read our updated guide to the new MOT LED headlight rules.

Headlamp compliance – quick reference

Defect MOT category
Permitted headlamp colour, position or intensity does not comply MAJOR
Product on lens/light source obviously reduces intensity or changes colour incorrectly MAJOR
Light source and lamp are incompatible MAJOR
Mandatory matched headlamps are not an appropriate matching pair MAJOR

Headlamp levelling systems

Some vehicles have manual or automatic headlamp levelling.

Where an applicable manual levelling device is fitted, the tester can operate the control and check that the headlamp beams move accordingly.

Vehicles with HID or LED dipped-beam headlights may have suspension or headlamp self-levelling systems. Where such systems are fitted and subject to inspection, they must work.

The headlamp levelling check does not apply to motor caravans.

Defect MOT category
Applicable headlamp levelling device inoperative MAJOR
Manual levelling device cannot be operated from driver’s seat MAJOR

Headlamp cleaning systems

Applicable headlamp cleaning equipment can also form part of the test.

Vehicles first used on or after 1 September 2009 that are equipped with headlamp washers may be subject to this inspection.

Defect MOT category
Applicable headlamp cleaning device inoperative MINOR
Applicable cleaning device inoperative with LED or gas-discharge/HID system MAJOR

Position lamps and sidelights

Front and rear position lamps — commonly called sidelights — are inspected where required.

The inspection can consider:

  • Presence
  • Operation
  • Condition
  • Security
  • Colour
  • Switching

Vehicles generally require two front and two rear position lamps, subject to exceptions for certain vehicles.

Position lamps must operate with other required lighting in accordance with the applicable requirements.

Position lamps – quick reference

Defect MOT category
Multiple-light-source lamp with up to half not functioning MINOR
Required lamp missing/inoperative or more than half of multiple light sources not working MAJOR
Defective lens MAJOR
Lamp insecure but not likely to detach MINOR
Lamp likely to become detached MAJOR
Switching does not operate as required MAJOR

Daytime running lights (DRLs)

Daytime running lamps fitted as original equipment are inspected on applicable vehicles.

For MOT purposes, DRLs are inspected where fitted as original equipment to applicable vehicles first used on or after 1 March 2018.

DRLs can sometimes also perform the function of front position lamps.

Where DRLs act as position lamps, their behaviour can change when the rear position lamps or headlights are switched on.

Will a failed daytime running light fail an MOT?

It can if the DRL is subject to the MOT requirements.

The vehicle’s date of first use and the equipment originally fitted are therefore important when determining whether a particular DRL fault constitutes a defect.


Brake lights

Brake lights — referred to as stop lamps in the MOT inspection manual — are inspected for applicable requirements including:

  • Presence
  • Operation
  • Condition
  • Security
  • Colour
  • Switching

A required brake light that is missing or does not work can result in an MOT failure.

Will one brake light out fail an MOT?

Yes, a required stop lamp that is missing or inoperative can result in a major defect.

More serious circumstances can result in a dangerous defect. For example, where all fitted stop lamps are missing or inoperative, this can be categorised as dangerous.

Brake lights – quick reference

Defect MOT category
Required stop lamp missing or inoperative MAJOR
All stop lamps missing or inoperative DANGEROUS
Lamp insecure but not likely to detach MINOR
Lamp likely to become detached MAJOR
Defective lens with no significant effect on emitted light MINOR
Lens defect adversely affecting emitted light MAJOR

Brake lights are one of the easiest things to check before an MOT. Ask someone to stand behind the vehicle while you press the brake pedal, or use a suitable reflection.


Direction indicators

Indicators are inspected for applicable requirements including:

  • Presence
  • Condition
  • Operation
  • Security
  • Colour
  • Switching
  • Flashing frequency

Direction indicators generally need to emit amber light, although exceptions apply to certain older vehicles.

Dynamic or sequential indicators are not automatically a reason for rejection.

Indicators – quick reference

Defect MOT category
Multiple-light-source indicator with up to half not working MINOR
Indicator missing/inoperative or more than half of light sources not working MAJOR
Lens defect not affecting emitted light MINOR
Lens defect adversely affecting emitted light MAJOR
Lamp insecure but not likely to detach MINOR
Lamp likely to detach MAJOR
Incorrect emitted colour, position or intensity MAJOR

Indicator flashing frequency

Applicable direction indicators should flash at between 60 and 120 times per minute.

Semaphore-type direction indicators are an exception and do not need to flash.

Defect MOT category
Indicator flashing rate outside 60–120 flashes per minute MINOR

Hazard warning lights

Hazard warning equipment is inspected where required.

Vehicles first used before 1 April 1986 do not generally need a hazard warning device under these requirements.

For applicable vehicles, the system needs to operate correctly.

Defect MOT category
Mandatory hazard warning device not fitted MAJOR
Mandatory hazard warning device inoperative MAJOR
Indicator/hazard switch has an impaired function MINOR
Indicator/hazard switch inoperative MAJOR

Front fog lights

Front fog lamps fitted to applicable vehicles first used on or after 1 March 2018 are inspected.

The tester can assess their:

  • Condition
  • Operation
  • Security
  • Colour
  • Switching

Front fog lamps subject to these requirements should emit a steady white light.


Rear fog lights

Applicable rear fog lamps are also inspected.

A rear fog lamp is generally required in the centre or offside of applicable vehicles first used on or after 1 April 1980, subject to vehicle-specific exemptions.

Rear fog lamps must emit red light.

Fog lamps – quick reference

Defect MOT category
Multiple-light-source fog lamp with up to half not functioning MINOR
Obligatory rear fog lamp missing MAJOR
Applicable front/rear fog lamp inoperative or more than half light sources not functioning MAJOR
Lens defect not affecting emitted light MINOR
Lens defect adversely affecting emitted light MAJOR
Lamp insecure but not likely to detach MINOR
Lamp likely to become detached MAJOR
Fog lamp switch inoperative or incorrectly operating MAJOR
Incorrect fog-lamp colour, position or intensity MAJOR

Reversing lights

Reversing lamps are inspected on applicable vehicles first used from 1 September 2009, excluding certain vehicle categories.

Reversing lamps should show white light to the rear.

Where reversing lamps are required and fitted, they must operate correctly.

They should operate automatically when reverse gear is selected and extinguish when reverse is deselected.

Reversing lamps – quick reference

Defect MOT category
Applicable reversing lamp inoperative MAJOR
Reversing lamp lens defective MAJOR
Lamp insecure but not likely to detach MINOR
Lamp likely to become detached MAJOR
Reversing-lamp switch not operating correctly MAJOR

Rear registration plate lights

Applicable rear registration plate lamps are inspected.

They need to illuminate the rear registration plate and operate in conjunction with the position lamps as required.

Registration plate lamps – quick reference

Defect MOT category
Plate lamp throws direct white light to the rear MINOR
One of multiple number-plate lamps/light sources inoperative MINOR
Single lamp or all plate lamps inoperative MAJOR
Lamp insecure but not likely to detach MINOR
Lamp likely to detach MAJOR
Rear plate lamp does not illuminate with position lamps as required MAJOR

For the registration plate itself, see our MOT registration plate rules and vehicle identification guide.


Rear reflectors

The MOT includes inspection of the mandatory rear reflectors where required.

Applicable vehicles generally require two red rear reflectors.

Reflective tape is not an acceptable substitute for a required rear reflector.

Rear reflectors – quick reference

Defect MOT category
Up to 50% of reflecting surface defective/damaged MINOR
More than 50% of reflecting surface defective/damaged MAJOR
Reflector insecure but not likely to detach MINOR
Reflector likely to detach MAJOR
Reflector colour/position incorrect MINOR
Required reflector missing or reflecting white to rear MAJOR

Lighting tell-tales

Applicable dashboard tell-tales associated with lighting equipment can also be inspected.

These include:

  • Main-beam headlamp
  • Direction indicators
  • Hazard warning lamps
  • Rear fog lamp

A main-beam tell-tale is required for applicable vehicles first used on or after 1 April 1986, subject to relevant exemptions.

The indicator tell-tale can be audible or visual.

A hazard warning tell-tale must be a flashing light.

Lighting tell-tales – quick reference

Defect MOT category
Mandatory indicator or hazard tell-tale missing/inoperative MINOR
Mandatory main-beam or rear-fog tell-tale missing/inoperative MAJOR
Hazard warning tell-tale does not flash MINOR

Trailer electrical socket

Applicable trailer electrical sockets are also inspected on vehicles fitted with towing equipment.

The precise inspection depends on the type of socket and towing arrangement.

The tester can inspect applicable electrical connections and their operation where required.

For more information about towing equipment, see our MOT test of towbar and towing hook.


Electrical wiring and battery

The MOT lighting and electrical-equipment inspection is not limited to bulbs and lamps.

Applicable electrical wiring can be checked for problems such as:

  • Insecurity
  • Damage
  • Poor insulation
  • Risk of short circuit
  • Unsafe routing or condition

The battery is also checked for security and applicable safety defects.

A serious electrical defect can result in an MOT failure.


Common MOT light failures

Lighting faults are among the vehicle problems that drivers can often identify before presenting a car for its MOT.

Things worth checking include:

  • Headlight bulb not working
  • Headlight aim obviously incorrect
  • Brake light not working
  • Indicator not working
  • Incorrect indicator flashing rate
  • Rear registration plate light not working
  • Rear fog lamp not working
  • Damaged lamp lens
  • Insecure lamp unit
  • Incorrect lamp colour
  • Incorrectly fitted replacement bulb
  • Incompatible LED or HID conversion
  • Defective applicable daytime running light
  • Headlamp levelling fault
  • Damaged electrical wiring

Pre-MOT lights checklist

Before taking your vehicle for its MOT, check:

  • Dipped-beam headlights
  • Main-beam headlights
  • Front position lamps/sidelights
  • Rear position lamps
  • Brake lights
  • Indicators
  • Hazard warning lights
  • Rear fog light
  • Front fog lights where applicable
  • Daytime running lights where applicable
  • Reversing lights where applicable
  • Rear registration plate lights
  • Obvious damage to lamp lenses
  • Headlights and other lamps are securely mounted
  • Relevant dashboard tell-tales work
  • Replacement bulbs appear correctly fitted

You may need another person to help check brake lights, or you can use a suitable reflection from a wall, garage door or window.

Remember that a visual check cannot reliably tell you whether headlamp aim meets the MOT limits. Headlight aim is checked during the MOT using appropriate testing equipment.

For the rest of the vehicle, use our complete MOT test checklist.


MOT Lights FAQs

What lights are checked on an MOT?

Depending on the vehicle, an MOT can include headlights, position lamps, brake lights, indicators, hazard warning lights, fog lamps, daytime running lights, reversing lights, registration plate lights, reflectors and relevant lighting tell-tales. Headlight aim is also checked.

Will one headlight out fail an MOT?

A mandatory headlamp that is missing or inoperative can result in an MOT failure. Different requirements and exemptions can apply to some older or specialist vehicles.

Will one brake light out fail an MOT?

A required stop lamp that is missing or inoperative can result in a major defect and MOT failure. If all fitted stop lamps are missing or inoperative, the defect can be categorised as dangerous.

Will an indicator bulb out fail an MOT?

A required direction indicator that is missing or inoperative can result in an MOT failure.

Do headlights have to be aligned for an MOT?

Yes. Applicable dipped-beam headlamp aim is inspected. Headlamp aim outside the permitted limits results in an MOT failure.

Can headlights be adjusted during an MOT?

The MOT tester is permitted to make minor adjustments to headlamp aim during the test. This is different from carrying out repairs.

Are LED headlights allowed for an MOT?

It depends on the headlamp and vehicle. For applicable vehicles first used on or after 1 April 1986, an existing halogen headlamp unit should not be converted for use with HID or LED bulbs. A complete replacement headlamp unit designed for the alternative light source is treated differently and is assessed against the applicable requirements.

Are daytime running lights checked during an MOT?

DRLs fitted as original equipment are inspected on applicable vehicles first used on or after 1 March 2018.

Are front fog lights checked during an MOT?

Front fog lamps fitted to applicable vehicles first used on or after 1 March 2018 are inspected.

Are rear fog lights checked during an MOT?

Applicable rear fog lamps are checked. A rear fog lamp is generally required on applicable vehicles first used on or after 1 April 1980, subject to the relevant vehicle exemptions.

Are reversing lights checked during an MOT?

Reversing lamps are checked on applicable vehicles, including relevant vehicles first used from 1 September 2009. Vehicle-category exemptions apply.

Does a number plate light have to work for an MOT?

Applicable rear registration plate lamps are inspected. If the only lamp, or all applicable registration plate lamps, are inoperative, this can result in a major defect.

Can a cracked headlight fail an MOT?

It can, but a crack does not automatically mean failure. The tester assesses matters including the condition, security, colour, light output and beam pattern of the lamp.

Can cloudy headlights fail an MOT?

They can if deterioration seriously affects the lamp’s light output or ability to meet the applicable requirements. The headlamp must also produce an acceptable beam pattern and meet the headlamp aim requirements.


MOT lighting defect categories

Throughout this guide you’ll see three defect classifications.

Minor

A minor defect does not significantly affect the safety of the vehicle or impact on the environment. The vehicle can still pass its MOT, although the defect should be repaired.

Major

A major defect results in an MOT failure.

Dangerous

A dangerous defect represents a direct and immediate risk to road safety or a serious environmental impact and results in an MOT failure.

A vehicle with a dangerous defect should not be driven until the defect has been repaired.


More information about MOT lighting requirements

MOT lighting requirements are more detailed than simply checking whether a vehicle’s headlights come on.

Different requirements can apply according to the vehicle’s age, date of first use, category and equipment fitted. MOT testers should therefore use the current DVSA inspection manual when deciding which requirement and defect classification applies.

For the complete vehicle inspection, read our MOT Test Checklist: What Is Checked on an MOT?.

You can also browse our individual MOT test descriptions and checks.

For the definitive technical requirements, refer to the DVSA MOT inspection manual – lamps, reflectors and electrical equipment.

This article provides general information about MOT lighting requirements in Great Britain. Requirements vary according to vehicle type, age, date of first use and equipment fitted and can change. The current DVSA MOT inspection manual remains the authoritative source for MOT testing standards.

 

What’s your view? Readers are invited to add comments and suggestions to this article.

You must be logged in to leave a comment.

Login or Register to Comment
MOTesting Logo
Subscribe to our newsletter, to get the latest news in your inbox.